Interior Design Construction Documents: SD, DD, CD Phases
Key takeaways
- Interior design construction documents are the permit-ready drawing set for interior work: interior elevations, finish plans, RCPs, millwork details, and schedules.
- SD communicates intent, DD locks decisions with dimensions and product selections, and CDs turn those decisions into contract language that survives plan check.
- A residential interior CD set typically runs 10 to 20 sheets, and any sheet a plan checker expects but finds missing triggers a correction letter and resubmittal cycle.
- CD millwork details cover overall dimensions, clearances, and attachment notes; fully resolved casework construction belongs in the fabricator's shop drawing package.
- In Washington, interior designers can stamp only with NCIDQ certification under RCW 18.210; otherwise a licensed architect must stamp the set.
Interior design construction documents are the final permit-ready drawing set for interior work: interior elevations, finish plans, RCPs, millwork details, and schedules, drawn at a level of detail a contractor and plan reviewer can build and check against. This walkthrough maps each deliverable to the phase where it first appears, from schematic design through design development to CDs.
What are interior design construction documents?
Interior design construction documents are the drawing set a contractor builds from: interior elevations, finish plans, reflected ceiling plans, millwork details, and the schedules that tie them together. They differ from a full architectural permit set in scope, not rigor. Your interior CD set covers what happens inside the walls and on their faces, while the architectural set carries the structure, envelope, life-safety, and code sheets the city reviews first. The phase structure behind them comes from standard AIA definitions of schematic design, design development, and construction documents, which define how much detail each phase owes (AIA Contract Documents). For a residential remodel in Washington State, that usually means your interior set rides alongside the architect's permit set or stands alone for plan check on finishes and millwork. If you work mostly on interiors, a purpose-built workflow like Pretiva Studio for interior designers keeps that narrower scope in your own Revit standard.
How do schematic design, design development, and construction documents differ for interiors?
Interior phases compress. A residential interior package moves from approved space planning to permit-ready sheets in three steps, and each step changes what your drawings promise.
Schematic design sets the plan: room layouts, furniture blocks, and a finish direction on a handful of sheets. Nothing here is dimensioned for construction.
Design development locks decisions. Interior elevations for kitchens, baths, and feature walls get drawn at larger scale, finish plans assign actual materials to surfaces, and reflected ceiling plans take shape. Dimensions appear, but tolerances stay loose.
Construction documents turn those decisions into contract language. Every interior elevation gets full vertical dimensions and callouts, millwork details get sections, finish schedules name products and vendors, and RCPs carry switching and fixture locations. The set has to survive plan check and a correction letter without a redline from the city.
For a solo practice, the DD-to-CD jump is where the hours go, which is why residential designers tend to look for help at that phase rather than earlier.
What level of detail should each phase deliverable include?
The mistake most solo practices make is drawing CDs at SD. The fix is matching detail to the decision each phase exists to make. SD drawings communicate intent: a finish plan with color blocks, interior elevations at 1/4" scale showing the general composition of a kitchen wall, no dimensions beyond overall lengths. DD drawings lock the decisions: dimensions, actual product selections, RCP with fixture locations and switching, and millwork elevations with enough detail for a cabinet shop to quote. CDs are what a reviewer reads for life safety and constructability: clearances, egress, guardrail heights, and sealed sheets where your state allows it. Washington requires a licensed architect to stamp; interior designers stamp only with NCIDQ certification under RCW 18.210, per the National Council of Interior Design Qualification certification overview.
| Deliverable | SD | DD | CD |
|---|---|---|---|
| Interior elevations | Massing, materials unlabeled | Dimensions, product tags | Full dims, sections, attachment details |
| Finish plan | Color blocks | Finish schedule with real SKUs | Schedule cross-referenced to specs |
| Millwork | Sketch, proportion study | Elevations + rough sections | Shop-drawing-level sections, hardware |
| RCP | Fixture locations, no circuiting | Fixture schedule, switching | Full circuiting, sizes, mounting |
If you use Pretiva Studio, the overnight drafts follow this split on the builders page: SD output stays diagrammatic, and it will not pretend to produce stamped CDs.
When do interior elevations and millwork drawings get produced in each phase?
Interior elevations start loose and firm up across the phases. At schematic design you might sketch one or two key elevations, like a kitchen wall or a primary bath vanity, to test proportions with the client. By design development those elevations carry real dimensions, materials, and hardware notes. In the CD set they become dimensioned, tagged, and referenced drawings tied to finish plans and schedules.
Millwork follows the same arc. SD is a block on the plan. DD adds face elevations with general dimensions and material callouts. At CDs you produce dimensioned millwork elevations, sections through counters and cabinets, and edge or pull details at your office standard.
Millwork details: what belongs in the CD set vs the shop drawing package
Your CD set should carry what the permit reviewer and general contractor need: overall millwork dimensions, clearances, section profiles, and attachment notes. Everything else, including fully resolved casework construction, hinge and slide schedules, and shop-verified field dimensions, belongs in the fabricator's shop drawing package, which they produce and you review.
If you keep a library of standard details, drafting repetitive elevations overnight in your own Revit and reviewing them on your own sheets is the model Pretiva Studio runs on; the guides at https://studio.pretiva.io/guides walk through sheet setup and revision workflows for exactly this phase transition.
What drawings belong in a final interior design construction document set?
A residential interior CD set runs sheet by sheet: a cover with sheet index, a finish plan keyed to a finish schedule, interior elevations for every wet wall and built-in run, reflected ceiling plans with lighting layouts, millwork details at 1 1/2" scale, and door, window, and equipment schedules. Anything a city plan checker could flag as missing costs you a correction letter and a resubmittal cycle, so the set should read like the checklist your reviewer uses.
Finish plans, RCPs, and schedules
The finish plan, RCP, and schedules carry most of the review risk. Your finish plan tags every floor, wall, and base finish with a code that resolves in the finish schedule; your RCP shows fixture types, switching, and ceiling transitions at the same grid as the partitions below. If those three sheets disagree, the correction letter writes itself. Washington jurisdictions submit through their own portals, and requirements vary by city, so check the permitting authority for your jurisdiction, such as the Washington State Department of Licensing business licensing pages, before you assume a standard set passes. For Everett-area residential work, the breakdown at https://studio.pretiva.io/everett-permits covers what reviewers there expect. Revision clouds and dated deltas on resubmittals keep the reviewer oriented.
How do interior CDs coordinate with architectural and contractor sets?
Your interior set has to agree with the architectural set on three things before plan check: shared coordinates, wall locations, and sheet references. In Revit, link the architectural model with shared coordinates published, not auto-origin, so your interior elevations and finish plans land on the same grid the contractor sees. If the architect revises a wall after your SD or DD work, the link update flags it, but you still have to chase the affected elevations and millwork details yourself.
Split responsibility explicitly in your general notes: you stamp finish plans, interior elevations, and RCP finish content; the architect of record keeps wall assemblies, egress, and structural items. Contractors read both sets together, so duplicate a note only once and reference the other sheet number rather than restating it. When a correction letter hits one set, check the other for the same comment before resubmittal, because plan reviewers cross-reference.
How do landscape construction documents relate to an interior CD set?
On most residential jobs, landscape is a separate permit package: planting plans, grading, hardscape, and irrigation, usually stamped by the architect or a landscape contractor, not part of your interior CDs. The two sets touch in a few predictable places. Exterior door thresholds and patio elevations need to match the grading plan, exterior material transitions belong on both sets, and any covered porch or outdoor kitchen with millwork ends up on your interior elevations even though the slab lives in the landscape set.
Where the overlap bites solo practices is resubmittals: a city comment on drainage can shift a patio elevation, which ripples into your threshold detail. If you are already paying $349/month for Pretiva Studio's Solo plan, which is priced "for a one-architect practice" (Pretiva Studio pricing), budget review time for that coordination rather than more drafting hours. Keep the landscape scope out of your sheet index and flag the shared details explicitly so your plan-check comments stay in one package.
How can a solo practice produce interior CDs faster without changing its standard?
Most of the hours in an interior CD set go to repetitive drafting: sheet setup, tagging, dimensioning interior elevations, building finish plans and schedules, and revision clouds on a resubmittal. Pretiva Studio targets that work. You upload sketches or a marked-up plan, the drafting runs overnight in your own Revit 2025-2027 file at your office standard, and sheets come back clouded for your review, redlines, and stamp. You keep managing the set instead of modeling every tag and dimension.
At $349/month on the Solo plan, one offloaded permit set replaces a contract drafter at $1,400-$2,400, so the math works if it reliably saves you even a day per set.
Where this approach falls short
It drafts, it does not design. Millwork details still need your judgment, and complex corridor or window conditions may come back wrong and faster to draw by hand. Every sheet still needs your review before it is stampable, so plan your mornings around redlining.
FAQ
Do interior designers need to stamp construction documents?
In Washington, interior designers can stamp only with NCIDQ certification under RCW 18.210; otherwise a licensed architect must stamp the set. Even where stamping is allowed, your interior CDs typically cover finishes, elevations, and RCP content, while wall assemblies, egress, and structural items stay with the architect of record. Split responsibility explicitly in your general notes so the reviewer knows who owns each sheet.
How many pages is a typical interior design CD set for a residential project?
Most residential interior sets run roughly 10 to 20 sheets: a cover with index, finish plan keyed to a finish schedule, interior elevations for wet walls and built-ins, RCPs with lighting layouts, millwork details, and door, window, and equipment schedules. The count varies with project size, but every sheet a plan checker expects missing means a correction letter and a resubmittal cycle.
Can interior construction documents be used for permit submission?
Yes, for the interior scope: finishes, millwork, and ceiling content can go through plan check as their own package or ride alongside the architectural permit set. Your set still has to agree with the architectural sheets on coordinates, wall locations, and references, since reviewers cross-check both. Requirements vary by city, so confirm with your jurisdiction's permitting authority before assuming a standard set passes.
What is the difference between millwork details in CDs and shop drawings?
Your CD set carries what the reviewer and general contractor need: overall dimensions, clearances, section profiles, and attachment notes. Shop drawings go further, with fully resolved casework construction, hinge and slide schedules, and shop-verified field dimensions. The fabricator produces the shop package and you review it. Blurring that line wastes CD hours on details the permit reviewer never reads.
How much does it cost to have someone draft interior construction documents?
A contract drafter typically runs $1,400 to $2,400 per set. Pretiva Studio's Solo plan costs $349 per month and prices itself for a one-architect practice, so one offloaded permit set covers the month if it saves you even a day. Drafting runs overnight in your own Revit file at your office standard, with sheets returned clouded for your review and stamp.